View Full Version : What Vise do you use?
11-27-2006, 12:31 PM
I am looking at vises now and trying to decide which one to get. What vise do you use and what do you like/dislike about it?
11-27-2006, 12:53 PM
I have an inexpensive (less than $50) Griffith vise I bought years ago when I started tying a few of my own flies. It is very basic and the only accessory I have bought is a weighted base so you dont have to clamp it onto a table.
Whenever I decide to replace it, I will invest in a Rotary vise and a bobbin hanger. Spend as much as you can on a quality vise and maybe talk with Walter at LRO for suggestions. * * * Troutman
11-27-2006, 01:14 PM
I own two. The Dyna-King Professional and the Renzetti Presentation. I like the Renzetti for the true rotary, the traveler will perform just as well, though. I have broken a plastic (it should be metal) screw that holds the rotary function on the Presentation. I emailed them to get a replacement and never heard anything back. That's a deal breaker for me. I won't own another Renzetti.
I like the Dyna-King because it's mulit-positional and I can comfortably tie flies from 10/0 to 26. It has 4 different postition adjustments but it doesn't have true rotary. This would be my pick of the two if I had to settle for just one.
You certainly don't have to start with a vise such as this but if you're the type that wants something that makes things easier, it's worth a look. I started out with a Dyna-King Squire. They have some good vises. As do other companies.
11-27-2006, 08:43 PM
bought a Griffith vise about 4yrs ago, not sure which model but it serves the purpose...I suppose there are better vises but this has alot of the bells and whistles.......bobbin holder, fly dryer/holder, clamp on or weighted base capability. I believe it was more around $75 when I bought it and I have been very happy with it. Now as I learn more about tying with the LRO tying classes, I may feel the need to upgrade...time will tell.......
btw......those newer "Rite" bobbins I bought at LRO are ........
11-27-2006, 11:10 PM
I have been using a Dyna King Squire for 5-6 years. It is simple, but does what it is supposed to do.
11-28-2006, 09:00 AM
Barracuda, nothing to dislike but the initial cost, i got over that as soon as i started tying on it though.
I still have an old Model A that i started on, as simple as they come, i'll still use it for streamers, more for sentimental reasons, being the Cuda would hold the hook just as easily.
I tied on a Renzetti Traveler for around 12 years, traded it off once i got the Cuda, no problems with the Traveler.
If you get a chance, go to a shop & play with a few, checkout they're functions , sort of like buying a rod, what works for one, may not work for another ;)
11-28-2006, 09:32 AM
I own a "traveler" also. I've had one for 20+ years. I love it. I tie midges to small saltwater and bass bugs with it. I am very rough on it, tying where ever I am on the road. I've only had to replace an "O" ring holding it together. I actually used some round rubber legs as a "temporary" fix (lasted five years ;). I've been meaning to buy a "bigger- better" vise for home and leave the Traveler in my tying kit, but that hasn't happened yet ;D.
Rfowler- contact Renzetti again, maybe Byron can give you a phone number? Most, if not all, flyfishing/ tying businesses been over backwards to satisfy customers, they need repeat customers the pool of customers is to small to produce a bad reputation.
'Tis the season to tie.
11-29-2006, 07:02 PM
The above link will help you in deciding which vise is right for you. Hans does a great job on all the vises and has some great insight to needs of tyers.
12-03-2006, 12:24 AM
Pedestal type, heavy base Regal rotating vise. It is indestructable, easy to mount a hook in, and I can lean...er..rest my hand on it while holding materials with my left hand. I have tied flys down to 24 on the standard jaws. This was a big step up from my Thompson model A
12-09-2006, 05:26 PM
I have been tying on an HMH Spartan for a couple years and I love it. Being somewhat of a research nerd, I studied up and went out and tried a few different vises. I like the solid feel and the basic rotary function. I bought the pedestal model. It is a traditional vise made very well. I am sure I will never NEED another vise (my wife does not read the message board). I would encourage you to get out and try a few and get your hands on as many as you can before you make your decision. Good luck!
12-09-2006, 08:08 PM
Miss seeing you buddy. Get up here soon!
We stock all the replacement parts for Renzetti. We don't charge for the plastic parts so give me a call toll free at 877-448-3474 and I'll send you what you need. We do charge for replacement jaws but they hardly ever wear out. BTW, I just checked my e-mail. Since yesterday morning I had 208 e-mails, 207 of which were spam. Companies get pounded with spam and it's easy to erase a real one. I use the telephone for that reason if it's something important. That's probably what happened with Renzetti. I think that part is plastic so it won't eat away at the shaft. I also use a Dyna King Professional and a Renzetti depending on what I'm tying.
Someone in our local TU chapter said "Everybody should have a vice... mine's a Renzetti." Wished I was clever enough to have come up with that on my own. Renzetti Traveler, about 3 years old, not a hiccup with it.
02-05-2007, 10:38 PM
Is anyone familiar with the Nor-Vise? I saw an amazing demo at the Charlotte show last weekend. Just wondering if anyone has any experience with these. (www.nor-vise.com)
02-06-2007, 12:09 AM
I just watched all the videos on that site. looks pretty neat.
Powered by vBulletin® Version 4.2.3 Copyright © 2017 vBulletin Solutions, Inc. All rights reserved.