Little River Outfitters Forum

Little River Outfitters Forum (http://littleriveroutfitters.com/forum/index.php)
-   Boats, Canoes and Kayaks (http://littleriveroutfitters.com/forum/forumdisplay.php?f=104)
-   -   Check out these new guys (http://littleriveroutfitters.com/forum/showthread.php?t=15959)

Rodonthefly 03-14-2012 02:24 PM

Check out these new guys
 
http://www.pavatimarine.com/boat_models/driftboats/

One of our enginerrs at work ran across these and sent me a link. Pretty cool looking boats. I don't know about rowing one, but I do like some of the stuff that comes one them. The door idea is awsome, it gets kind of hard for this fat boy to get in and out!

MadisonBoats 03-14-2012 03:34 PM

The door idea is very similar to mine. I really think they make a nice and innovative boat.

Trico 03-15-2012 02:15 PM

Look like nice boats and look as they would be super tough. I have fished out of aluminum drift boats a couple of times and really don't care for them on the waters I have fished. I am certain in some real rough water they would be great. The door is real nice but aluminum in my mind is really cold in cold weather, really hot in hot weather and noisy. Looking at the floor in this boat I would think it would be real noisy. But this is only my opinion. All in all still is an interesting boat and thanks for sharing.

Knothead 03-16-2012 08:52 AM

I'm in agreement with trico on the aluminum aspects of the boat. My first question would be how would it hold up to the rocks on the Hiwassee?

DBKSTONE2 03-19-2012 11:19 AM

Pavati makes a very nice boat. When I was making a decision on a boat last summer I called and got a price sheet to have a boat built. I really liked the doors and the Kevlar coated diamond plate and wave cutter. I put together a "dream" boat and it was going to be 17K after delivery. Now granted that would be a boat that could be handed down to my children and grand kids, but ****! 17k for a boat with NO motor is an investment!! :eek: I went to the Bristol fly show to see a boat up close and pulled a brand new Clacka home for 8K total. I love it and think it is a great boat for the money. Especially for my first boat. I may save the Pavati for my retirement when I "need" the doors in the side and the 10 cup holders.:cool:

Bfish 03-19-2012 11:47 AM

Quote:

Originally Posted by Knothead (Post 99451)
...My first question would be how would it hold up to the rocks on the Hiwassee?

It holds up as good, if not better than fiberglass.

Problem with aluminum is it tends to stick to rocks, rather than slide over them.

MadisonBoats 03-19-2012 11:49 AM

Quote:

Originally Posted by DBKSTONE2 (Post 99490)
Pavati makes a very nice boat. When I was making a decision on a boat last summer I called and got a price sheet to have a boat built. I really liked the doors and the Kevlar coated diamond plate and wave cutter. I put together a "dream" boat and it was going to be 17K after delivery. Now granted that would be a boat that could be handed down to my children and grand kids, but ****! 17k for a boat with NO motor is an investment!! :eek: I went to the Bristol fly show to see a boat up close and pulled a brand new Clacka home for 8K total. I love it and think it is a great boat for the money. Especially for my first boat. I may save the Pavati for my retirement when I "need" the doors in the side and the 10 cup holders.:cool:

I hope to have my first model out for about half the cost of a Clacka/Hyde with the pass through doors. Trying to push some key obstacles through to get a plug built in the next year.

billyspey 03-19-2012 10:23 PM

Quote:

Originally Posted by DBKSTONE2 (Post 99490)
Pavati makes a very nice boat. When I was making a decision on a boat last summer I called and got a price sheet to have a boat built. I really liked the doors and the Kevlar coated diamond plate and wave cutter. I put together a "dream" boat and it was going to be 17K after delivery. Now granted that would be a boat that could be handed down to my children and grand kids, but ****! 17k for a boat with NO motor is an investment!! :eek: I went to the Bristol fly show to see a boat up close and pulled a brand new Clacka home for 8K total. I love it and think it is a great boat for the money. Especially for my first boat. I may save the Pavati for my retirement when I "need" the doors in the side and the 10 cup holders.:cool:

that clacka will last a life time, and a great choice , remember no ultimate boat they all trade off some where.


All times are GMT -4. The time now is 05:26 AM.

Powered by vBulletin®
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.