Little River Outfitters Forum

Little River Outfitters Forum (http://littleriveroutfitters.com/forum/index.php)
-   Boats, Canoes and Kayaks (http://littleriveroutfitters.com/forum/forumdisplay.php?f=104)
-   -   Rear leg locks for Hyde (http://littleriveroutfitters.com/forum/showthread.php?t=16824)

Rodonthefly 05-06-2013 10:15 AM

Rear leg locks for Hyde
 
Does anyone have a rear removeable leg lock for a Hyde I can use for a templet? I am building a custom skiff. I know I can order them from Hyde but I am wanting to make this one out of wood. All I need is to trace the top part onto carboard, so I can cut my wood.
thanks in advance!

waterwolf 05-08-2013 03:32 AM

Give me a buzz on my cell, if you need it again let me know.

MadisonBoats 05-08-2013 06:47 AM

Rod,
One tip; find some pictures on the Net.

Save them and open in photoshop. Change them to an illustration or line art format by selecting one of the photo effects. Or copy and paste in to MS Word; use the Picture Format tab and select remove background.

Then; resize in inches to what you want. Print out the template in sections with crop lines on 8 x 10 paper so you can tape them together.

I would make it out of green block foam from hobby lobby and use a hot-wire cutting tool you can get pretty cheap. Or just use a knife and some sharp tools.

After that; I would sand it smooth and form it to the shape you want. Install the poles. You may want to add a substrate board at the bottom for extra support. Then wrap it in several layers of fiberglass and resin. Sand it smooth and wallah!


All times are GMT -4. The time now is 09:55 PM.

Powered by vBulletin®
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.