Little River Outfitters Forum

Little River Outfitters Forum (http://littleriveroutfitters.com/forum/index.php)
-   Tackle and Gear (http://littleriveroutfitters.com/forum/forumdisplay.php?f=71)
-   -   Tip Top Repair (http://littleriveroutfitters.com/forum/showthread.php?t=6771)

Rog 1 07-31-2006 09:14 AM

Tip Top Repair
 
Need some help. Broke the tip off a custom made rod with no warranty so I need to replace the tip top. How do I determine what size replacement to order and what type of measurement is needed. Thanks.

Grumpy 08-01-2006 03:02 PM

Re: Tip Top Repair
 
The blank isn't covered by warranty? Take it by your nearest flyshop that carries rod building supplies & slip a new one on to fit, you'll want a tad bit of play for some glue, don't force a new tip on..

Grumpy

tennswede 08-02-2006 07:43 AM

Re: Tip Top Repair
 
Try to mesure with a gauge sold at hardware stores. It is a little plastic device with numerous holes in it labeled with different diameter size. This device is made to measure diameter of drill bits. It should run you about two dollars. Then get some tip top adhesive which can be bought at any sporting goods store.


All times are GMT -4. The time now is 12:10 PM.

Powered by vBulletin®
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.