Page 3 of 3 FirstFirst 123
Results 21 to 23 of 23

Thread: translucent green weenie

  1. #21
    Join Date
    Jun 2007
    Location
    Northern Kentucky
    Posts
    1,127

    Default

    Bob,
    Where did you get the green tubing? The Hobby Lobby here in Florence KY only had clear. Somehow, a "clear Buckeye Weenie" just does not have the ring as a "green Buckeye Weenie" does...

    Thanks,
    Jeff

  2. #22
    Join Date
    Jul 2006
    Posts
    878

    Default Wapsi clear tubing

    Wapsi makes a clear tubing material that's very similar to the beading stretch tubing material, although the Wapsi material isn't quite as colorful and certainly isn't "neon". The bright "neon" material has gotten harder to find at Hobby Lobby. You can get the clear material at Wally World in white and clear and in .5 mm and 1 mm diameter. Look in the beading section and look under the cording materials display and you will find cards with multiple diameters and colors on them. In general, the bright and colorful material is getting harder to find at the craft stores.

    The following were tied with clear stretch tubing from both Hobby Lobby and LRO. I have changed out the thread under-structure with varying results.

    Incidentally, I was hoping for some high degree of flotation factor with this stuff since it is a hollow tubing and the act of tying traps air inside the tubing material. Unfortunately (or fortunately depending on your goal and needs), this stuff sinks like a rock. I don't think you can tie any type of emerger pattern and expect it to hang in the film without using a ton of deer hair, snowshoe rabbit or some other high-flotation material above it.


    So here we go: first up, an Olive midge tied on a Tiemco 101, #18 with a Danville light olive 210 denier thread base with a thread head. Note that the body takes on a slight taper based on tension applied while wrapping. In subsequent examples there is no tension applied





    Next, a clear tubing over a foil base tied in with a Coats & Clark 406N thread base and a thread built head, also on a Tiemco 101 size 18 hook...




    Next up, a clear tubing wrapped over an alternating red/black thread base tied on a Tiemco 206 BL size 16 hook:



    And finally, a variation of the process. This is an Iko Caddis tied with clear D-rib material over an olive thread base. Just to show that Hareline D-rib material does pretty much the same thing if you can't find the Hobby Lobby stuff.


  3. #23
    Join Date
    Jun 2007
    Location
    Des Moines, Iowa
    Posts
    177

    Default

    I use the Wapsi "micro midge tubing" too. It's cheap, easy to tie with and looks good. I have several different colors and sizes. Please be kind, I am an awful tier.


    Sz 20, brown micro tubing wrapped with alot of pressure. (The herl is all messy because I fished this guy Friday.)


    Sz 20 with alittle bigger amber colored tubing wrapped using less pressure.


    I've never tied a weenie before so I thought I would give it a go. The first one was terrible so I decided to add some bulk to the body with thread and then add some holographic tinsel under the tubing to get it to "pop" alittle more. Still not great but much better:
    Last edited by UofMontanaAlum; 03-23-2008 at 01:54 PM.

Similar Threads

  1. Green Weenie
    By flybum62 in forum General Fly Tying
    Replies: 6
    Last Post: 05-30-2010, 02:08 PM
  2. Green Weenie
    By Brook Fan in forum Tackle and Gear
    Replies: 6
    Last Post: 06-25-2008, 09:53 PM
  3. Take along the green weenie
    By MikeRob in forum Smoky Mountain Fishing
    Replies: 0
    Last Post: 06-08-2008, 02:24 PM
  4. Another Green Weenie
    By rainshaker in forum General Fly Tying
    Replies: 2
    Last Post: 03-26-2008, 11:54 PM
  5. Green Weenie on the Elk
    By irfishing in forum Tennessee Trout Streams and Tailwaters
    Replies: 1
    Last Post: 03-18-2008, 12:27 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •