Page 2 of 2 FirstFirst 12
Results 11 to 20 of 20

Thread: Clinch River 9/29/08

  1. #11
    Join Date
    Jan 2006
    Location
    Knoxville
    Posts
    275

    Default

    Try being me.....

    For some reason or another....my boat rides about two inches deeper than most drifters. It's gotta be all my extra gear and not my large posterior.

    Thank God for Clackacrafts. The TIMEX of driftboats.

  2. #12
    Join Date
    Oct 2006
    Location
    Alcoa, TN
    Posts
    506

    Default Rocky

    Not trying to start a war but I quote a good friend "Those who own a Clacka, never rowed a Hyde!" HAA HAA HAA~ Just had to pick a fight!

    No, but seriously, while on the Big Horn river we had high side Clacka's with wooden oars. The boat felt like a cheap peice of crap! All of the boxes were made of fiberglass and squeaked, the bottom certainly flexed alright and it was impossible to pull it off of a run while the boat was tracking. It was terrible...fishing out of um was alot more difficult too. The person in the back felt stuck and it wasn't easy to change oarsman with the person in the back of the boat! However I will say that it was more than likely an older model Clacka and the heavy wooden oars didn't compare to the counterbalanced carbon fiber oars my Hyde had! Not to mention I was used to my low profile. I woulda liked to have been able to row a low profile (side) Clacka!

    I can only imagine the abuse that your boat see's. I want to learn that line on the Hi, but I'm a little afraid of taking my baby out there to the wolves! Plus I'm sure you don't mind an extra boat staying outta your watershed!

    I do wanna make it over there how is things on the HI?

    ~Brett

  3. #13
    Join Date
    Jun 2008
    Location
    Travis AFB, CA
    Posts
    662

    Default

    What's the purpose in having a boat if you're not gonna use it? Doesn't make too much sense to me, would you rather put a few scratches on your boat and catch more fish or not use it at all and keep it pretty? I know they're expensive, but use it, man! I catch dozens more trout if I'm floating than if I am wading. You may be different, though.
    Trey Nichols- jato_jr@yahoo.com

  4. #14
    Join Date
    May 2007
    Posts
    147

    Default

    I will say that beating your boat to **** isn't a nice way to spend a day even if you are catching some fish, but thats just me. It sends a chill down my spine hearing a rock rip down my hull. Uh, I hate even thinking about it

  5. #15
    Join Date
    Jan 2007
    Posts
    334

    Default

    have you bought a boat lately?

  6. #16
    Join Date
    Jun 2008
    Location
    Travis AFB, CA
    Posts
    662

    Default

    Quote Originally Posted by golfballs03 View Post
    I will say that beating your boat to **** isn't a nice way to spend a day even if you are catching some fish, but thats just me. It sends a chill down my spine hearing a rock rip down my hull. Uh, I hate even thinking about it
    I guess this is true, it's an uneasy feeling but it isn't life altering for me. Unless you happen to get marooned on a rock with a jagged edge and it really does damage, that's a different story.

    Quote Originally Posted by billyspey View Post
    have you bought a boat lately?
    My dad bought a 12' jon boat
    Trey Nichols- jato_jr@yahoo.com

  7. #17
    Join Date
    Oct 2006
    Location
    Alcoa, TN
    Posts
    506

    Default Bill you rock!

    Worrgamesguy! Dude, lemme rephrase this. When I say pretty I mean that when I have things that I enjoy as much as I do that boat, it's hard to shuv it up against a rock on purpose just to float it downstream. I have consistantly been beat up on by the guys I work with, about how I spent over 8 grand on a boat that has no motor. That's like spending 8 grand on a yak, canoe, or john boat!

    At a pretty fair rate of $100.00 a horse power (pretty common in the boating industry) I could have bought a decent little john boat with a 70 horse motor for what I paid for my Hyde and it just isn't aluminum! It would be the equivilant of you buying a new car and running it through a brior patch on purpose...Does that make sense? Why heck no!

    I love the boat and enjoy every second of being in it, just not being on a tailwater where you purposely have to beat up your boat to get it down stream while catching 6'' to 14'' fish! Now if there was some 24" fish involved I'd probably have less to gripe about! Non the less I'd still not like it! Those boat's are designed to be pretty precise at taking on runs and avoiding rocks in low water conditioins. Like I've said I've repeatedly floated the Watauga, which I've been told is the second hardest river to float (1st being the HI) and I had yet to put a scratch on my boat until I met that section of the Clinch!

    Bill your hilarious and I wanna row your Clack just for good measure! I believe it's you and me on the 29th, we will just have to beat um up together this time!

    ~Brett

  8. #18
    Join Date
    Jun 2008
    Posts
    1,325

    Default

    Its only gel coat, once again and the mark of a good boat is a chewed up chine and signatures from the rivers it has traversed.

    Hyde, Clacka, they are all the same in my opinion. I row a Hyde, but have rowed a bunch of different mfg.'s boats and they all get the job done.

  9. #19
    Join Date
    May 2007
    Posts
    147

    Default

    A boat is going to get beat up overtime anyway, but going down a river like the Hiwassee, I'd rather do it with a person who has floated it before - I don't want to get all beat up if I don't have to. But I've never floated the HI so maybe I'm over estimating it

  10. #20
    Join Date
    Jun 2008
    Posts
    1,325

    Default

    The Hi has one real bad spot at the stairsteps, no matter what it seems you are going to take a shot. The difference between it and the Clinch or Holston is that you are moving fast when you hit rocks. The Clinch rocks are generally slow hits which have a louder bark then bite. There are smallmouth rivers in this part of the state that make any trout stream look like a joke in terms of boat beating abilities.

Similar Threads

  1. Clinch River 8-12-14
    By Robinryder2 in forum Tennessee Trout Streams and Tailwaters
    Replies: 5
    Last Post: 08-13-2014, 01:46 PM
  2. Clinch river 12/14/08
    By jzimmerman in forum Tennessee Trout Streams and Tailwaters
    Replies: 29
    Last Post: 12-20-2008, 11:51 PM
  3. Clinch River Fly Box
    By Wilson10 in forum Tackle and Gear
    Replies: 6
    Last Post: 05-27-2008, 06:07 PM
  4. Clinch River
    By FRW in forum Tennessee Trout Streams and Tailwaters
    Replies: 6
    Last Post: 04-28-2006, 10:53 PM
  5. Clinch River / Small Dam + The key to the Clinch
    By phil4christ in forum Tennessee Trout Streams and Tailwaters
    Replies: 2
    Last Post: 03-24-2006, 12:09 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •