Page 4 of 4 FirstFirst ... 234
Results 31 to 36 of 36

Thread: Somebody Talk me out of it!

  1. #31
    Join Date
    Mar 2008
    Location
    right outside Memphis, TN
    Posts
    69

    Default Help- Epoxy Wrap Question

    A have put on the epoxy and a few of my wraps don't look as good as I would like. The epoxy is uneven. I am sure that the rod is fully functional, but I want it to look good as well. What can I do? I read somewhere that you can file down the lumps, wipe with denatured alcohol and put a fresh layer of epoxy. Does that sound right?
    The greatest treasure we can leave our children, is the knowledge and love of the great outdoors.....

  2. #32
    Join Date
    Sep 2008
    Location
    Columbus, Indiana
    Posts
    3

    Default

    It sounds like your epoxy started to set up on you. What type are you using? There are a bunch of things that can be done. Is it one or two wraps that aren't level or is it through the entire rod? Check out www.rodbuilding.org There is a lot of great info there. If it was me and (I'm very picky with what I build) I would take a razor blade or exacto knife and cut the wraps off by sliding the blade down the guide foot and peeling the rest of the wrap off (donít cut into the blank). If every wrap is uneven it will be time consuming but I would want to start over again (check that web site because they may have better options then what I'm saying). When you apply the epoxy next use an alcohol burning candle to add a little heat to help even out you epoxy after you apply it to each wrap. Heat lowers the viscosity of the epoxy and it will also take care of any bubbles you may have enclosed in the epoxy. With a first time rod builder and a 9 foot fly rod itís hard to keep the epoxy from setting up on you before you get through the rod. I use to mix epoxy two times for a fly rod. I would do half the rod and then mix up some more and finish the rod off.
    Live life by the three F rule. Family, Friends and Fly Fishing. I will let you put them in order.

  3. #33
    Join Date
    Apr 2009
    Posts
    223

    Default

    Anyone used one of these all cork handles/reel seats? Thinking about using one on a 3wt blank I just ordered. Curious how secure the reel is with that slip ring attachment. Also, how will the cork handle take wear? Should I use a sealant on it?


    Quote Originally Posted by Troutman View Post
    I had the 4wt built for me by a custom rod maker out in Wyoming. I told him what I wanted and sent some pictures of what I liked. He did a great job and I am very pleased with it. He hand shaped the cork grip.
    The 3wt (lower rod in the top picture) is one I did. I bought the handle kit from janns net craft cat # 250734 http://www.jannsnetcraft.com/fly-rod-handle-kits/ and installed it myself.
    I use the 4wt for tailwater trout and the 3wt for mtn fishing and bream in the warmwaters. nothing like a bluegill on a full flexing rod!
    The handles are called cigar grips



  4. #34
    Join Date
    Jan 2007
    Location
    Middle Tennessee
    Posts
    658

    Default

    Quote Originally Posted by Mundele View Post
    Curious how secure the reel is with that slip ring attachment.
    I have a 4# rod with slip rings and it holds the reel perfectly, no slippage. I think as long as the rings are correct size, you'll be fine. Makes for a very light-weight rig.

    steve
    The mass of men lead lives of quiet desperation, unless they fly fish... with apologies to Thoreau

  5. #35
    Join Date
    Apr 2009
    Location
    Mid Tennessee
    Posts
    919

    Default

    I agree with Stonefly. I have an older Orvis 3wt Tippit rod that uses this system. No worries.

  6. #36
    Join Date
    Apr 2009
    Posts
    223

    Default

    Great. I'm gonna build a 3wt rod using one of those handles. Are there any other available handles of that type, or do most folks make their own?

    --Matt

Similar Threads

  1. Gear talk - Matt's new backcountry toys
    By mattblick in forum In The Backcountry
    Replies: 21
    Last Post: 08-31-2012, 02:46 PM
  2. Let's talk beads
    By Rodonthefly in forum General Fly Tying
    Replies: 2
    Last Post: 07-22-2010, 11:20 AM
  3. Let's talk about drift shall we.
    By Rodonthefly in forum Tennessee Trout Streams and Tailwaters
    Replies: 35
    Last Post: 06-11-2010, 03:55 PM
  4. Replies: 2
    Last Post: 11-09-2009, 07:42 PM
  5. let's talk carp
    By milligan trout degree in forum Warmwater Fly Fishing
    Replies: 37
    Last Post: 02-16-2009, 11:38 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •