Results 1 to 7 of 7

Thread: Florocarbon used for sinking flies

  1. #1
    Join Date
    Jun 2008
    Location
    Tennessee
    Posts
    336

    Question Florocarbon used for sinking flies

    I just made a post about sink tip line a couple of days ago and i appreciate the tips and advice very much. I was also wondering if an 9ft section of say 15-20lb florocarbon used as a leader would be a good alternative to a sink tip leader. Does anyone think would be an effective way to get streamers down to the big boys? Thanks.
    Mark <::::><


    "We try to be perfect, but we're only fishermen. We wade out into the water, we don't walk on top of it."

  2. #2
    Join Date
    Feb 2008
    Posts
    2,516

    Default

    Lovin that avatar bro! We got to hit the Caney soon...Don't forget about the Smoky's on Memorial Day weekend. Ray has room for one more.

  3. #3
    Join Date
    Jan 2006
    Location
    Townsend, Tennessee
    Posts
    1,397

    Default

    Hi bigpopper,

    You will have problems with using only one size of fluorocarbon for 9' of leader. I believe it will be hard to run over big flies which you will probably be using with 12# tippet. Fluorocarbon sinks faster than nylon but not that much faster. I use fluoro for abrasion resistance. Some people say it is less visible to fish. I don't know about that. I use a formula that works well for turning over big flies. I don't know where I learned this but I use 6' of butt section, 2' of mid section and 2 feet of tippet. What I end up with is a 10' leader. Sometimes I start with 30# for the butt and sometimes 39#. The mid is usually 20# to 25#. For the tippet you are talking about is 12#. Sometimes I use 16# for tippet. Add 2 feet of that. Use double surgeon knots and you will get a good connection even though you are joining two different sizes with big diameter differences. That knot seems to work for me. The difference between nylon and fluorocarbon as far as sink rates won't make that much difference when casting flies with 12# leaders in my opinion. Most of the leaders I build this way are used for big fish and big flies. You can play around with the lengths according to the size of the flies you are casting. Sometimes I shorten the butt by a foot or so with heavy flies. I usually build these leaders while on the water.

    Byron

  4. #4
    Join Date
    Jan 2006
    Posts
    887

    Default

    I agree with Byron on the bigger tippet. The leader it self isn't going to give you a lot of depth, sometimes, the longer the leader, your sink rate may be less
    I'm throwing a 300 grain on one unit with 3-5' of 20# at the end of that, it won't sink all the way unless i mend like there's no tomorrow. If you're fishing still water, you may get some more depth with a longer leader & real heavy fly though.

    Grumpy

  5. #5
    Join Date
    Jan 2006
    Location
    Townsend, Tennessee
    Posts
    1,397

    Default

    I agree with Grumpy. Hi Grumpy!

    What I described is what I use with floating lines and usually in saltwater. The shorter leader would work better with sink tip lines. And you could turn over flies with what Grumpy describes.

    Byron

  6. #6
    Join Date
    Feb 2009
    Posts
    19

    Default

    I base my set up on flow, if they are running 1 unit between 34 and 3800 cfs, I will throw a 250 grain streamer express with a 24 to 30" pc. of 12 lb. flouro. If they are running any more flow than that, I throw a 375 gr. wet tip express with a 24" pc of flouro. I lose a lot of flies hanging the bottom, so I know its getting plenty deep.

    JW

  7. #7
    Join Date
    Jun 2008
    Location
    Tennessee
    Posts
    336

    Thumbs up

    BIG THANKS EVERYBODY! Lots of great info I'll be using! I'm really looking foward to hooking into some big fish!
    Mark <::::><


    "We try to be perfect, but we're only fishermen. We wade out into the water, we don't walk on top of it."

Similar Threads

  1. Sinking Line
    By donwinn in forum Tennessee Trout Streams and Tailwaters
    Replies: 5
    Last Post: 02-12-2017, 10:29 PM
  2. Sinking line?
    By bronzeback in forum Tackle and Gear
    Replies: 2
    Last Post: 01-22-2010, 12:51 PM
  3. Sinking Tip
    By bigpopper in forum Tackle and Gear
    Replies: 2
    Last Post: 03-13-2009, 10:34 AM
  4. Tip of Fly Line Sinking
    By irfishing in forum Tackle and Gear
    Replies: 5
    Last Post: 02-25-2008, 11:18 PM
  5. Favorite Sinking Lines
    By D-Drake in forum Tackle and Gear
    Replies: 0
    Last Post: 01-10-2008, 12:59 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •