Results 1 to 5 of 5

Thread: Clift Rd Question

  1. #1
    Join Date
    Sep 2009
    Location
    knoxville
    Posts
    42

    Default Clift Rd Question

    I recently purchased a 14 foot aluminum boat with a 9.9 hp and was wondering how much generation is needed to acess the Holston at Clift Lane. Has anyone had any experience putting in a boat there?

  2. #2
    Join Date
    Jun 2008
    Posts
    1,330

    Default

    You better have a serious truck to use that ramp anymore, it has washed really bad and if the water is off to any significant degree than you will be calling a tow truck. I pulled 3 different trucks out a few weeks ago and the water had only been off for about 12 hours at the time. With the water running full bore you could probably get in and put with no issues.

  3. #3
    Join Date
    Sep 2009
    Location
    knoxville
    Posts
    42

    Default

    I have a 4x4 so do not think I would have a problem there. I just do not want to tear up a boat. Do you know how much water is there on 1 generator.

  4. #4
    Join Date
    Jun 2008
    Posts
    1,330

    Default

    Quote Originally Posted by stevee71 View Post
    I have a 4x4 so do not think I would have a problem there. I just do not want to tear up a boat. Do you know how much water is there on 1 generator.

    Plenty of water on one generator, but even with four wheel drive you could have issues, especially with as much water as they have been running.

  5. #5
    Join Date
    Sep 2009
    Location
    knoxville
    Posts
    42

    Default

    Thanks for the info. I went by the French Broad yesterday ans cannot believe the amount of water they are releasing.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •