Results 1 to 4 of 4

Thread: question about strike indicators

  1. #1
    Join Date
    Jan 2007
    Posts
    39

    Default question about strike indicators

    i am happy to say that as of Saturday, I am the proud owner of a TFO 3wt 7'6" Professional series. (Without breaking the bank, I might add) I tried the finesse but I liked the stouter feel of the professional. Thanks to the staff at LRO for letting me try out a few before I made my decision. I tried it out Saturday and Sunday above Tremont and I really liked it! It kept me out of trees a lot better than the 5/6wt I am used to!

    On to my question though. I had very little luck Saturday or Sunday. I had my strike indicator about two feet up from my pheasant tail i was fishing. it was one of those sticky, orange neon indicators that are about the size of a dime after you squeeze them together. I was wondering if those are big enough to spook fish, especially with the water conditions the way they are. I thought i saw some much smaller ones at LRO. Should i try those? or leave it off completely?

  2. #2
    Join Date
    Jan 2006
    Location
    Crossville, TN
    Posts
    2,397

    Default

    First let me say congrats on the new rod!

    Now about the indicator...as low as the water is, I would be fishing without a "normal" strike indicator. Try using a dry/dropper combo, with a #16 EHC, para Adams, or stimulator as the dry and then drop a smaller beadhead nymph (#18-#20 bhpt, copper john, etc...) below that. The dry shouldn't spook the fish as bad and will increase your odds of hooking up! If it was me, I would probably leave off the nymph altogether as long as the water is staying warm enough for the fish to be active...they should still be rising to dries just fine...
    "Then He said to them, 'Follow Me, and I will make you fishers of men.'" Matthew 4:19

    Guided Fly Fishing with David Knapp
    The Trout Zone Blog
    contact: TroutZoneAnglers at gmail dot com

  3. #3
    Join Date
    Apr 2006
    Location
    Knoxville
    Posts
    1,168

    Default Indicators

    Tiger,
    I have found that when the fish are really spooky or the water is low or clear that using a very bouyant dry fly is the best approach. I have seen fish on the clinch and SoHo where switching from a strike indicator to a size 16 sulfur makes a big difference. Now if I am fishing in stained, fast, or deep water (>4') that I just use a balloon. I learned this trick out west. You can buy a bag of 100 water balloons for around $1, and they are way easier to see in rough conditions than a standard indicator.

    Travis

  4. #4
    Join Date
    Oct 2007
    Location
    upstate n.y.
    Posts
    21

    Default

    I've used those indicators ,Palsa is the brand I think, quite a few times. and I have noticed that they sometimes will shut off spooky fish. Fluorocarbon may help especially in 6 and 7 x. I thought that these relatively small indicators would be a little more stealthy than some. Just like you I discovered they have their limitations. Parachutes greased up nicely just like the man says!

Similar Threads

  1. DIY New Zealand style strike indicators
    By Stana Claus in forum Tackle and Gear
    Replies: 4
    Last Post: 12-30-2014, 01:05 AM
  2. What size Turn-on-strike indicators?
    By tnflyguy in forum Tackle and Gear
    Replies: 9
    Last Post: 05-07-2009, 08:52 PM
  3. Indicators
    By ajh10567 in forum Tackle and Gear
    Replies: 16
    Last Post: 02-20-2008, 10:29 PM
  4. Rio Kahuna LT Strike indicators
    By Chuckwalla in forum Tackle and Gear
    Replies: 6
    Last Post: 02-15-2007, 02:13 PM
  5. Strike indicators
    By FFM4LIFE in forum Smoky Mountain Fishing
    Replies: 16
    Last Post: 01-16-2007, 03:37 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •