Home Register Today's Posts Members User CP Calendar FAQ

Go Back   Little River Outfitters Forum > Fly Fishing Board > Tennessee Trout Streams and Tailwaters

Reply
 
Thread Tools Display Modes
  #1  
Old 03-10-2011, 05:54 PM
finandfeather finandfeather is offline
Junior Member
 
Join Date: Feb 2011
Posts: 5
Default Switch rods

Ok long time lurker first time poster.

Last year I started fishing light weight switch rods on tail waters and have enjoyed using this method for double nymphs and large streamers. I started using a 420 gram Skandi compact floating system or a weight forward 5 floating line with the rod.

What I'm wondering is no one else using this out here on the clinch or other tail waters in and around the area? The rod is a ECHO 10' 6" 4wht, it casts a wht forward five awesome overhand and spey casts really nicely as well.

Just was looking for others who are doing this....thanks
Reply With Quote
  #2  
Old 03-10-2011, 06:16 PM
gutshot gutshot is offline
Senior Member
 
Join Date: Jul 2008
Posts: 170
Default

What does it do better than a single hand or a Spey rod? I prefer a single for low water and a Spey rod for high water. I spent a week switching back and forth from some Spey to some switch rods and really developed disdain for the switch rods. The concept is nice but the application is not in my experience. Too heavy for a single hand application and too light for the spey.

I found that the switch couldn't give me the ompff I needed to get a larger streamer out on high water and I didn't enjoy it as much. I used a 6 wt spey the most for swinging larger streamers and also used it on one or two generators when i didn't have a boat to drift large nymphs under an indicator. I like the longer line and rod as I could actually fish a long drift in the faster water and catch fish with it. Something I couldn't do with a single hand rod in high water. There is a real advantage when stuck up against the bank on high water using the spey style casting that has almost no back cast. Hooked some very large fish with the nymph doing this.

I like to use a 10 foot single hand and the rods closer to 13 for two handed. I agree with you comment below that the longer rod is great for improved mending.

That's what I did...and my experiences.

If you have tried a rod longer than 10 feet, do you notice problems landing fish?

I found it was largely an negative experience to fish with tippet lighter than 8 lbs as I would break off too many fish with lighter tippet while trying to land them as I would have issues handling the line and the fish.

Last edited by gutshot; 03-10-2011 at 07:51 PM..
Reply With Quote
  #3  
Old 03-10-2011, 06:37 PM
finandfeather finandfeather is offline
Junior Member
 
Join Date: Feb 2011
Posts: 5
Default Thanks? I guess

If you have fished a Spey you know that you can cast without a back cast 100-120 ft and with a 10 1/2 foot rod you can mend a lot of line. I also use a one handed rod to was just asking. Thanks for the warm reception.....

Last edited by finandfeather; 03-10-2011 at 06:55 PM..
Reply With Quote
  #4  
Old 03-10-2011, 11:45 PM
BlueRaiderFan's Avatar
BlueRaiderFan BlueRaiderFan is offline
Senior Member
 
Join Date: Feb 2008
Posts: 2,512
Default

Quote:
Originally Posted by finandfeather View Post
If you have fished a Spey you know that you can cast without a back cast 100-120 ft and with a 10 1/2 foot rod you can mend a lot of line. I also use a one handed rod to was just asking. Thanks for the warm reception.....

Ah well...welcome to the board either way. I am looking into buying a switch rod myself. I know little about them but have seen videos by Kinney. I too think the switch is better suited for my needs but I have a 4wt and a 6wt and want to get my two hander in an 8wt. I may have to get the smallest spey rod instead.
Reply With Quote
  #5  
Old 03-11-2011, 08:40 AM
finandfeather finandfeather is offline
Junior Member
 
Join Date: Feb 2011
Posts: 5
Default No look into......

The TFO deer creek 6wt and bump up two line sizes for a traditional 8wt weight forward floating, I have used that combo a lot on the New River for smallies swinging and stripping crey patterns and minnows. You can cast at least 100 foot with a nice easy motion and no false casts.
Reply With Quote
  #6  
Old 03-11-2011, 10:24 AM
Heavynets Heavynets is offline
Member
 
Join Date: Apr 2010
Location: Indiana
Posts: 76
Default

I built my switch rod from a Batson 7 wt. 10'-8" 4 piece blank. I love that rod and use it about 50% of the time. If I could only own one rod, it would be a 7 wt switch rod.

I have never fished the park, but I frequently fish tailwaters and medium to large rivers. The right line, leader and fly/streamer combination is critical for a good fishing experience. With the right combination you can turn over a streamer the size a small squirrel or mend a nymph 40 feet out.

I use an #8 WF floating line or a skagit with a sinking tip. I'm still experimenting with the skagit line weights to find the right combination.
Reply With Quote
  #7  
Old 03-11-2011, 12:34 PM
BlueRaiderFan's Avatar
BlueRaiderFan BlueRaiderFan is offline
Senior Member
 
Join Date: Feb 2008
Posts: 2,512
Default

Quote:
Originally Posted by finandfeather View Post
The TFO deer creek 6wt and bump up two line sizes for a traditional 8wt weight forward floating, I have used that combo a lot on the New River for smallies swinging and stripping crey patterns and minnows. You can cast at least 100 foot with a nice easy motion and no false casts.

Ah! Good to know...I can't wait to try using one.
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump



All times are GMT -4. The time now is 07:04 PM.



Powered by vBulletin®
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.