Home QLinks New Posts Members User CP Calendar FAQ

Go Back   Little River Outfitters Forum > Fly Fishing Board > Boats, Canoes and Kayaks

Reply
 
Thread Tools Display Modes
  #1  
Old 05-04-2012, 02:42 AM
SmokyMt4runner SmokyMt4runner is offline
Member
 
Join Date: Aug 2010
Location: Gatlinburg
Posts: 53
Default Looking for drifter info...

Recently found a 16ft, 13 year old, restored wood drift boat. At a VERY good price.

Other than the obvious...anything i should know about an older restored drifter?.....i am trying to talk myself into this one.....she just looks sooooo hot.

I also keep hearing about the Hyde and the g4 bottom...major price difference...is the standard bottom that much maintenance? or are there other issues??

Thanks in advance for any help.....
Reply With Quote
  #2  
Old 05-04-2012, 05:54 AM
billyspey billyspey is offline
Senior Member
 
Join Date: Jan 2007
Posts: 308
Default

I know 2 Hyde boats with g4 bottoms with issues the g4 is coming un glued letting water in, g4 adds extra weight which you don' t need in a drift boat, g4 is probably over kill . never owning a wood boat but attracted to them, more maintenance. saying that I know a wood that has been I service for several years.
Reply With Quote
  #3  
Old 05-04-2012, 07:27 AM
Knothead Knothead is offline
Senior Member
 
Join Date: Apr 2009
Location: SE Tennessee
Posts: 644
Default

Soft spots indicating dry rot in the wood? The vast majority of drift boats I see on the Hiwasee are Clackacraft boats.
__________________
John Torchick
http://www.hiwasseecustomrods.com
Reply With Quote
  #4  
Old 05-04-2012, 08:37 AM
Hoosier Hoosier is offline
Senior Member
 
Join Date: Jan 2007
Posts: 153
Default

While I am not familar with wooden drift per se I would suspect that the maintenance will be alot the same as a wooden canoe. Just give it a good look over (assuming it is galssed over) to make sure the glass/epoxy looks solid. That the wood is solid. Then, if that is correct, recognize that every couple years you would need to strip and refinish the varnish. If it is stored outside, you will need to refinish it more often. Again, I am assuming that it was/is glassed/expoxied.
Reply With Quote
  #5  
Old 05-04-2012, 10:54 PM
Grumpy Grumpy is offline
Senior Member
 
Join Date: Jan 2006
Posts: 782
Default

I'll take a glass boat any day of the week, it's enough work to row one, much less re -finish one every so many years.
If you're planning on running some rock gardens, another reason to stay away from the wood boat.

Grumpy
Reply With Quote
  #6  
Old 05-30-2012, 03:19 PM
Flat Fly n's Avatar
Flat Fly n Flat Fly n is offline
Senior Member
 
Join Date: Dec 2006
Location: East TN
Posts: 533
Default

Get a Clacka or a Hyde without G4 and smile everytime you hit a rock instead of crying. Your goal is to fish and not worry about the finish.
__________________
I am a great admirer of spectator sports, especially on television; it keeps the riffraff off the trout streams.
Reply With Quote
  #7  
Old 06-04-2012, 08:57 PM
Drifter Drifter is offline
Member
 
Join Date: Oct 2008
Posts: 33
Default

Smokeymt4runner,

Lots of misinformation here regarding wooden driftboats. I built one from a Tatman kit 14 years ago. It still has the original paint and varnish. The biggest misconception is a woodie owner is constantly sanding and varnishing. Nothing could be further from the truth. If you take care of the boat....it will last. UV rays and moisture are its downfall. I let mine sit in the driveway for a day following a trip. Once it's dry I roll it in the garage. There are woodies out there that are 50+ years old.

As far as durability.....I have a plastic UHMP "shoe" on the bottom of my boat. I laugh as I drift over algae-covered rocks that have pieces of white gel coat on them. My boat slides right over the rocks. In fact....I can drag it down the boat ramp if needed.

Here's a photo of a launch at the Blue Ridge Dam (Taccoa River). It slides right over the rock rip-rap. I've seen fiberglass owners laying down carpet and rubber mats. I even saw one guy breaking the big rocks into smaller ones with a sledge hammer.




I guess what I'm saying is this....talk to a wooden boat owner if that is what you are interested in.

Try this website: www.woodenboatpeople.com
Reply With Quote
  #8  
Old 06-04-2012, 10:26 PM
mstone mstone is offline
Senior Member
 
Join Date: Sep 2006
Posts: 258
Default

Just bought a Montana Boatbulders wooden skiff. The bottom on this boat is plascore covered with a Linex coating that seems to be bomb proof. Even though it won't see the upper Hiwassee, I'm not scared to bump rocks with it. Keeping it covered when not in use is the ticket as the sun will not help anything.
Reply With Quote
  #9  
Old 06-05-2012, 08:28 AM
MadisonBoats's Avatar
MadisonBoats MadisonBoats is offline
Senior Member
 
Join Date: Nov 2008
Location: Norris, TN
Posts: 1,868
Default

Quote:
Originally Posted by Drifter View Post
Smokeymt4runner,

Lots of misinformation here regarding wooden driftboats. I built one from a Tatman kit 14 years ago. It still has the original paint and varnish. The biggest misconception is a woodie owner is constantly sanding and varnishing. Nothing could be further from the truth. If you take care of the boat....it will last. UV rays and moisture are its downfall. I let mine sit in the driveway for a day following a trip. Once it's dry I roll it in the garage. There are woodies out there that are 50+ years old.


As far as durability.....I have a plastic UHMP "shoe" on the bottom of my boat. I laugh as I drift over algae-covered rocks that have pieces of white gel coat on them. My boat slides right over the rocks. In fact....I can drag it down the boat ramp if needed.


Here's a photo of a launch at the Blue Ridge Dam (Taccoa River). It slides right over the rock rip-rap. I've seen fiberglass owners laying down carpet and rubber mats. I even saw one guy breaking the big rocks into smaller ones with a sledge hammer.

I guess what I'm saying is this....talk to a wooden boat owner if that is what you are interested in.
Awesome, that is how a boat is meant to be used. As a tool and not a hindrance.

Quote:
Originally Posted by mstone View Post
Just bought a Montana Boatbulders wooden skiff. The bottom on this boat is plascore covered with a Linex coating that seems to be bomb proof. Even though it won't see the upper Hiwassee, I'm not scared to bump rocks with it. Keeping it covered when not in use is the ticket as the sun will not help anything.
I believe I saw you in your boat Sunday. That was a very good looking boat.
__________________
“Every human has four endowments- self awareness, conscience, independent will, & creative imagination.
These give us the ultimate human freedom... The
power
to choose, to respond, to change.”


Reply With Quote
  #10  
Old 06-05-2012, 09:34 PM
Drifter Drifter is offline
Member
 
Join Date: Oct 2008
Posts: 33
Default

She's got some scars....but it gives it character
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump



All times are GMT -4. The time now is 07:25 PM.



Powered by vBulletin®
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.