Home Register Today's Posts Members User CP Calendar FAQ

Go Back   Little River Outfitters Forum > Fly Fishing Board > Boats, Canoes and Kayaks

 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #11  
Old 03-20-2012, 08:08 AM
Rodonthefly Rodonthefly is offline
Senior Member
 
Join Date: Jul 2009
Posts: 389
Default

Quote:
Originally Posted by MadisonBoats View Post
The key factors for most of the tailwaters in E. TN are CFS Rate and the displacement amount of the boat. I usually clamp an old jumper cable claw with a rope attached to a tree branch if I am looking to hold a position. I had four-clamps left over when I wired my trolling motor mainline to my battery utilizing a nice Sears doorbusting sale on jumper cables.

Also; I use an spring loaded anchor davit I designed and built for my fishing on the Clinch. My setup utilizes a tackle and pulley design with a spring loaded cushion on one end. This acts as a shock absorber when I drag and get snagged.

I am still trying to perfect a setup for the Clinch. I have lost about 3 anchors in the past 4 years and one chain-ball. Try some of the techniques I posted earlier and see if they work for you Rod.

Also; let me know if you need another anchor and I will set it out for you or drop it off at your house the next time I visit my brother...
I might take you up on that if you have a 30 pounder laying around. Or an extra chain ball that weighs that much? Also I thought about looking around for a big piece of steal pipe and try makeing me on.
__________________
www.clinchriverflyfishing.com
Reply With Quote
 

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump



All times are GMT -4. The time now is 08:27 PM.



Powered by vBulletin®
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.